Reasons Why Your Breaker Keeps Tripping After Reset

Are you repeatedly coming across a severe issue of frequently tripping circuit breakers? It can be quite frustrating. A tripping circuit breaker is not an actual issue. It can be a symptom of a bigger problem. It can indicate an overloaded circuit, overheated appliance, electrical short, or ground fault issue.

Understanding the reasons for why your breaker keeps tripping after reset can help you achieve better results. 

Why Does My Breaker Keep Tripping?

As we stated before, there can be multiple reasons that make a breaker keep tripping. Let us explore a few of these specific reasons. 

Overheating In Appliances

The circuit breaker breaks not just because of the issues with itself. It can be because of the overheating issues in your appliances. Appliances like washers and dryers, microwave ovens, refrigerators, and air conditioners can cause overheating at times and make the breaker trip. 

Check if you are misusing the appliance or neglecting the necessary maintenance. The appliance itself might have developed a few issues. 

Overloaded Circuit

Verify whether the circuit is consuming more power than its intended capacity. This can make the circuit heat up and subsequently trip. The circuit breaker will trip to ensure that the further electricity-related problems are resolved. 

There can be several signs that may indicate overloading—

• Flickering and dimming lights
• Burning smells 
• Warm wires when touched 
• Overheated appliances. 

Short Circuit 

A short circuit happens when a low-resistance connection is established between the two points in an electrical circuit. This will make the current flow in a direction where it is not intended to. This event will cause excessive current flow. The condition can occur in an outlet, a switch, or inside an appliance. 

Short circuit can result in overheating, electrical fires, and damage to electronic devices, systems, and appliances. This can even result in significant loss to your property and even personal safety issues. It is advisable to identify the exact causes of the short circuit. 

Ground Fault 

Any fault with the grounding can be yet another cause for the breaker to trip frequently. A ground fault is a type of short circuit issue that happens when a hot wire touches the grounded part of a switch box, appliance, or bare ground wire. 

Several reasons can cause a ground fault –

• Water leakage issues 
• Wire damage 
• Damaged appliances

If you suspect the circuit breaker is tripping because of the ground fault issues, we recommend fixing this issue first. Otherwise, you may end up facing fatal accidents. 

Outdated Wiring

Over time, your property's wires and installations may sustain damage. Wiring is a key element in an electrical distribution network. If the wires have degraded over time, they may leak electricity into the surrounding areas. This can result in a power surge. 

This issue can be indicated by frequent tripping, a burning smell, a buzzing sound from your outlets, and scorch marks on the outlets. Check with the electrical maintenance service provider to help address the issues. 

Power Surges 

Power surges can be yet another reason for breaker tripping all of a sudden. In fact, it happens when your electrical system receives a massive spike in the electric current supply. This will result in an overload, which will subsequently cause the circuit breaker to trip. This is actually a safety mechanism and is used to prevent the surge from affecting your valuable appliance when they are plugged in.

Most of the time, the power surges may be quite harmless. They cause nothing more than a momentary increase in the level of electricity. However, if the breaker does not trip, you may end up with damaged appliances. 

How Do You Fix a Breaker That Keeps Tripping?

The best way to prevent a circuit breaker that keeps tripping is to identify the cause of the problem. 

A circuit breaker that keeps breaking can be dangerous. This can be a sign that indicates that the electricity system in your property is overloaded. If you leave it untreated, you will end up permanently damaging the appliances. It may also cause fatalities like fire hazards. 

You can partner with a reliable electrical works service provider to handle issues with circuit breaker tripping and analyze the exact causes. You can consider redistributing the devices across different circuits to ensure a balanced load. Also avoid using multiple high-powered devices simultaneously. 

In case you are facing a few issues that you can not fix on your own, you can consider opting for thorough assessment and repair. 

In Conclusion

It can be quite dangerous if you find your breaker keeps tripping quite frequently. In such a scenario, we recommend you to identify the exact causes. The primary causes for the same can include overloaded circuits, a short circuit, a ground fault, or a faulty appliance.

Get in touch with the electrical maintenance service provider who can help you fix the electrical and other relevant issues with due care and professionalism. Wadi Maareb electrical maintenance service provider in Jebel Ali, Dubai, we are experts in providing you a complete and comprehensive level of services across the UAE. 

Contact us for all your needs and fix the causes that might be resulting in your breakdown trip. We help you address your concerns and safeguard your home and property.